Are you ready to take the plunge and learn how to ride a 150cc motorcycle? If you are then check out this blog post! Here you will find a motorcycles 150cc tutorial with step-by-step instructions so that you can ride your bike safely. We will explain, in simple terms, safety checks and each step from riding to parking a motorcycle. By the end of this blog post, you will have all the necessary knowledge to get started with your new 150cc motorcycle. So, let’s get started!
Before you start
There are some basic principles and features that you should understand before you start. 150cc motorcycles offer a lot of power and can be a great way to get around, but they can also be intimidating for first-time riders. Knowing the basics of how to ride a 150cc motorcycle will help make your experience more enjoyable.
First of all, it is critical to know beforehand what kind of terrain you will ride your motorcycle on. 150cc motorcycles are typically more powerful than other motorbikes and can handle higher speeds. Additionally, they tend to have a higher center of gravity, so you should be aware of this when taking corners.
In regards to protective gear, make sure you wear a helmet that fits you well with comfort. Gloves are not necessary; but if you ride your motorcycle regularly in the sun, then gloves can help protect your skin from sun exposure.
Interestingly enough, the term “150cc” does not actually refer to the size of the engine – instead, it is the displacement of the motor in cubic centimeters (cc). As such, two bikes with the same 150cc displacement can actually have different engine sizes!
Getting on the motorcycle
Before you get on the 150cc motorcycle, check all the controls to ensure that everything is in working order. Make sure the handbrake is off and the kickstand is up. If your bike has a center stand, use it to lift the bike off of its wheels.
Once you have checked the controls, it’s time to get on the bike. The following order can help you with each step:
- Put your left foot on the left footpeg.
- Reach over with your right hand and grab the handlebar. With your right foot, place it onto the right footpeg. Now, you should be standing in the correct position.
- With your hands on the handlebar and feet on the pegs, put pressure on your feet while swinging your body up and over to the seat.
- Once you are seated, you should be in the correct riding position. Make sure your feet are firmly planted on the pegs and your hands are firmly gripping the handlebar. A comfortable position means your back is straight and your arms are slightly bent.
- Now that you are seated, adjust your mirrors. Make sure they are positioned in such a way that you can see behind you and what’s going on around you.
Starting the engine
Starting the engine on a 150cc motorcycle is fairly simple. Here are the steps to follow:
- Make sure the kill switch is in the “on” position. This is usually located on the handlebars and looks like a small lever.
- Check the choke lever, which is also usually located on the handlebars. If the engine has been off for a while, the choke should be in the “on” position or pulled out. If the engine has been running recently, the choke should be in the “off” position or pushed in.
- Turn the key in the ignition, or press the start button if there is one. The bike should start right up!
- Once the engine is running, slowly move the choke lever back to its original position, letting the engine warm up before you begin riding.
You should keep in mind a few basic cautions. You should not start the engine if the motorcycle is in gear, as this could cause a kickback. Make sure that the transmission is neutral before starting the engine. Also, always make sure the bike is on a level surface when starting. If the bike is on a slope, the engine might start to move in the wrong direction.
Riding the motorcycle
Now that the engine is running and you are seated on the motorcycle, it’s time to get moving. To begin moving forward on a street, press the clutch lever all the way in and roll the throttle open slowly. As you release the clutch, the bike will begin to move forward. Be sure to keep your body in a straight line with the motorcycle and maintain steady pressure on the throttle.
When beginning to ride, go slowly until you get comfortable. It is important to stay focused on what’s happening around you and keep your eyes on the road. Once you are more experienced, you can pick up speed and practice leaning into turns like a pro.
How to use the brakes on the motorcycle
If at any point you feel like you need to brake or make a stop, be sure to do so smoothly. Apply both brakes at the same time while gently rolling off the throttle and ease the motorcycle to a stop. Here is how to do it safely and correctly.
Firstly, you should always start braking with your front brake. To do this, you simply squeeze the right-hand lever on the handlebar. This will engage the front brakes and begin slowing your motorcycle down.
Secondly, it’s important to use both brakes together in a gradual manner. If you only use the front brake, you can quickly lock up your wheels and lose control of the bike. To apply both brakes, squeeze the left-hand lever with your left hand while keeping the right hand on the right-hand lever. This will engage both brakes and help you slow down in a safe and controlled manner.
Lastly, you should also practice emergency stops to learn how much pressure to put on each brake. When practicing emergency stops, make sure to be aware of your surroundings and pay attention to where you’re going. It’s best to practice on flat and open terrain with no obstacles or other vehicles around.
How to make a turn on the motorcycle
Making a turn on a 150cc motorcycle is often a challenging part of riding. It’s important to stay alert and practice safe turning techniques in order to avoid accidents.
When you are ready to make a turn, the first step is to switch your turn signal on and check your mirrors to make sure the way is clear. Then, slow down and position yourself at an appropriate distance from the center line, which should be about two seconds away. To do this, you can use the three-second rule – count “one thousand one, one thousand two” before you begin your turn. This will give you enough time to adjust your speed as necessary.
To actually turn the motorcycle, you need to lean into the turn, while slightly shifting your weight. Use the handlebars to help guide you around the corner. Start with gentle movements and increase your angle as you go, while gradually increasing speed until you reach your desired point. Be sure to keep your eyes up and focus on where you want to go – don’t look down at the road or try to accelerate too quickly.
When exiting the turn, you should straighten up slowly and be aware of any possible hazards such as oncoming traffic or pedestrians. If you are turning at a sharp angle, you should not move too fast or too slow. Make sure you are going at an appropriate speed for the curve that you are taking.
Finally, always remember to watch out for other drivers on the road. After making a turn, remember to switch your turn signal off so that you do not confuse other drivers behind you. Pay attention to posted speed limits and signals, and never cut corners or cross double yellow lines.
How to safely stop the motorcycle
Before you come to a stop, make sure to signal to the other drivers on the road by using your turn signal. Then, gradually reduce your speed and lightly apply pressure to both brakes. Make sure not to lock up your wheels as this can cause your bike to skid and lose control.
You should also try to keep the bike balanced and upright while stopping, as this will help avoid skidding or flipping. Finally, once your motorcycle is fully stopped, set the parking brake and then put the engine into neutral.
Parking
Before parking, make sure you have stopped the engine and put on the kickstand. The kickstand should be on firm ground so that the motorcycle doesn’t fall over.
When you’re ready to park, find a spot that is big enough for your motorcycle and has good visibility for you to see when you come back. Then, make sure your wheels are pointing in the same direction and make sure your brake is on and engaged.
Once you’ve found the perfect spot to park, take a few moments to look around and double-check that everything is in order. Look out for any potential hazards such as potholes or cracks in the pavement that could cause your bike to tip over. Also, if it is a public parking lot, make sure there are no vehicles nearby that could accidentally back into your bike.
Finally, you can lock it up with a chain and padlock or a disc lock. This will ensure that your motorcycle is safe and secure while you’re away.
Conclusion
It is important to follow all safety protocols, use protective gear, and take some quality time to learn the basics of riding 150cc motorcycles before embarking on any journey. With the right instructions and practice, anyone can become a confident motorcycle rider in no time. If you need more support, reach out to a local biking organization or knowledgeable biking enthusiasts for help.